01562 702 352 - 07469 718 828
CNC MACHINE TOOL REPAIR AND MAINTENANCE SPECIALIST
We provide onsite support to our customers - any machine tool, any age
Experience in all CNC manufacturing industry fields, including automotive, aerospace, textiles, food & beverage, petrochemicals, R&D, science & education
Christmas and New Year 2023
Note Control CNC Services Ltd will be closed from
20th December 2023 to 3rd January 2023
Blog Post
4th December 2019
We love XYZ Machine Tools!
A very busy day today replacing a 2 x 15A drive on an XYZ Minimill 560 with Siemens 802D control after the X axis failed with a drive fault. The next task was to overcome a software glitch on another XYZ. This time a 710VMCC with Siemens 828D control. After reloading a fresh NC archive, this resolved the issue caused by a corrupt file, which we suspect occurred after a power cut.
Finally another XYZ, this time a CT52 Turning Center/Lathe with a sticky Cycle Start button. An easy fix by stripping down the control panel, removing and re-soldering a replacement surface mount push button onto the PCB and reassembling the control panel, much cheaper than replacing the entire control panel!
We love XYZ machine tools at Control CNC Services having worked on them for nearly 20 years, we have amassed a wealth of knowledge and experience. We keep a large amount of XYZ spares in stock and can assist with all failure elements, be they mechanical, electrical, or control-related. Based in Worcestershire / West Midlands, we are ideally placed to offer site support across the UK. Please feel free to contact us for any help or assistance with your XYZ machine tools.
Previous Post
21st November 2019
Siemens 611U fault, alarm E-A608 speed controller output limited.
The fault was diagnosed by swapping the power section (LT module) to another axis and the fault followed, indicating a faulty LT module.
Next Post
12th December 2019
Today we have been working on this stunning factory-fresh Mach 1062 VMC with Siemens 828D control. Firstly, we had to configure it for through spindle coolant after fitting an upgraded encapsulated spindle.
We did this using HMI Startup with a field PG to update the topology.
ABOUT US
A family business established in 2016, Control CNC Services Ltd. has over 30 years of experience in the CNC machine tool industry.
Our engineers support all aspects of CNC applications. We provide a total breakdown solutions package; whether the fault is mechanical, electrical, electronic, software, control, or drive, our multi-disciplined engineers will resolve the problem.