01562 702 352 - 07469 718 828
CNC MACHINE TOOL REPAIR AND MAINTENANCE SPECIALIST
We provide onsite support to our customers - any machine tool, any age
Experience in all CNC manufacturing industry fields, including automotive, aerospace, textiles, food & beverage, petrochemicals, R&D, science & education
Christmas and New Year 2023
Note Control CNC Services Ltd will be closed from
20th December 2023 to 3rd January 2023
Blog Post
3rd January 2022
Root Cause Faults
We get contacted a lot over intermittent and continuing servo drive issues. There are many companies out there who will request that the end user remove all of the servo drives and associated hardware and send it to them for diagnosis and repair.
Ultimately, the customer ends up with a huge bill and, more often than not, is still left with the same issue unresolved and unfixed.
We always advise a site visit from us, we will always endeavour to get to the root cause of the issue and correct it in the most cost-effective manner possible, giving advice to our customers throughout the process.
Through many years of experience, we have developed methods to enable us to quickly and correctly diagnose the source of the faults, coupled with the large amount of spare components that we carry, which enables us to carry out first time fixes.
Please do call us, even if only for advice. We will always try to help first with advice and remote support. If we cannot help remotely, then we will advise you of the best actions and attend the site to resolve the issue if necessary.
Previous Post
The spindle motor on this Hardinge VMC was found to be dead short across all three phases.
We found the wrong, ill-fitting fan cable tied to the back, so the wiring on overload and contactor were tricking the machine.
Next Post
We saved our customer money with the repair on this Sinumerik 810D HMI screen.
The backlights had gone short circuit which in turn took out the inverter.
Next Post
January 5, 2017
This is what happens when a Deublin valve seizes while the spindle is cutting at 15000 rpm!
ABOUT US
A family business established in 2016, Control CNC Services Ltd. has over 30 years of experience in the CNC machine tool industry.
Our engineers support all aspects of CNC applications. We provide a total breakdown solutions package; whether the fault is mechanical, electrical, electronic, software, control, or drive, our multi-disciplined engineers will resolve the problem.
33 Holman Street, Kidderminster, DY11 6QY
Mob - 07469 718828 or Tel - 01562 702 352
Website Design by Jemma Dalton 2023 - © Control CNC Services Ltd.