01562 702 352 - 07469 718 828
CNC MACHINE TOOL REPAIR AND MAINTENANCE SPECIALIST
We provide onsite support to our customers - any machine tool, any age
Experience in all CNC manufacturing industry fields, including automotive, aerospace, textiles, food & beverage, petrochemicals, R&D, science & education
Christmas and New Year 2023
Note Control CNC Services Ltd will be closed from
20th December 2023 to 3rd January 2023
Blog Post
8th April 2020
Noisy Spindle and Poor Surface Finish
A noisy spindle and poor surface finish on his Hardinge lathe were the complaints from this customer. We carried out a site visit to diagnose, after a few checks and tests, we concluded that the spindle bearings had started to fail.
Unfortunately, through excessive working, the grease had dried out, it was only a matter of time until the spindle seized completely, potentially causing more damage.
We removed the spindle and had it professionally rebuilt, run and tested before returning to recommission it.
All this was done over 3 days to minimise disruption to our customer.
Please contact Control CNC using the red button at the top of this page if you think we would be able to help with your machine. We cover the whole of the UK and Ireland. We can help you book a service, quote you for a repair, or help you purchase the best quality parts for your business.
Previous Post
30th March 2020
Some of the earlier Siemens 810D and 840D controls can suffer from hard-drive data loss and corruption.
This is more often than not caused by not shutting them down correctly.
If the control is accessing or writing data to the hard drive and it’s turned off, the files become corrupt, rendering your machine useless.
Next Post
22nd May 2020
A frustrating issue was solved for our customer on his XYZ Vulcan 250. This turning centre was suffering from intermittent turret clamp and unclamp faults, which were disrupting the production of ventilator components.
After a quick investigation, we found there was excessive backlash on the intermediate gear within the turret, caused by the keyway rolling over and the collar on the intermediate shaft had broken free and was slipping.
ABOUT US
A family business established in 2016, Control CNC Services Ltd. has over 30 years of experience in the CNC machine tool industry.
Our engineers support all aspects of CNC applications. We provide a total breakdown solutions package; whether the fault is mechanical, electrical, electronic, software, control, or drive, our multi-disciplined engineers will resolve the problem.
33 Holman Street, Kidderminster, DY11 6QY
Mob - 07469 718828 or Tel - 01562 702 352
Website Design by Jemma Dalton 2023 - © Control CNC Services Ltd.